Product SKU ID:
Product Name: NANO-POLE® Series
The NANO-POLE® is designed for optimal size, DC consumption, RF power handling, insertion loss, signal purity and linearity. The NANO-POLE® provides a minimum center frequency step size of 10 MHz typically but can be modified based upon request. The NANO-POLE® requires a +3.0 V supply that typically draws 5 mA when not hopping. The supply voltage should be adequately filtered as noise present on this pin will influence the RF signal purity. The NANO-POLE® uses SPI control interface.
The reduced size and power consumption, combined with optimal RF power handling, insertion loss, signal purity and linearity make Pole/Zero’s NANO-POLE Filter applicable for multiple markets, including defense, EW, radar, communications, satcom, and automated test equipment.
|Frequency Coverage||(Multiple bands):||Input/Output Impedance:||Inband RF Power Handling:||Inband Third Order Intercept Point:||Tuning Control:||Tuning Speed:||DC Current:|
Operating Temperature Range:
|225 MHz to 3000 MHz||50 Ω||+30 dBm (typical) *Reference data sheet||+42 dBm (input) typical||SPI||10 uS (typical)||30 mA (typical) *Reference Data Sheet|
-40° to +85°C
.078 × .047 × .03 (in.)
20 × 12 × 7.62 (mm.)
BSC is based in York, UK, BSC offers its full range of non-ITAR products to the RF global marketplace, whether for small quick turn development runs or high volumes associated with series production of phased array RADAR and EW systems and commercial market place needs. A small selection of the active microwave assemblies and modules offered include front end preselectors, Switched Filters for Antenna front ends, IF assemblies, DRFM front ends, adaptive filtering including switched multiplexers, switched filter banks, and Software Defined Radio filter assemblies.